Grade D1 LD1 Fire Alarm Installation in Ferndown
EAC Fire and Security recently completed a Grade D1 LD1 fire alarm installation in Ferndown, upgrading the property to provide the highest level of life protection in line with current UK fire safety standards. This system was designed and installed following a site assessment to ensure full coverage throughout the property, improving early fire detection […]
Fire Extinguisher Trolley Supply for New Development
EAC Fire and Security recently supplied mobile fire extinguisher units for a local development company to support fire safety on their new construction site. Mobile Fire Extinguisher Trolleys Supplied For this project, we supplied two pairs of fire extinguisher trolleys, each fully equipped with the appropriate extinguishers for common construction site fire risks. Each trolley […]
Fire Exit Signage Installation at Apartment Block in Parkstone
EAC Fire and Security recently completed the installation of fire exit signage throughout a block of apartments in Parkstone, ensuring the building’s escape routes are clearly marked and compliant with current fire safety standards. Fire Exit Signage Installed in Communal Areas During this project, new fire exit signs were installed across the communal areas of […]
Burglar Alarm Upgrade in Branksome Woods – Pyronix Enforcer Installation
EAC Fire and Security were recently contacted by a homeowner in Branksome Woods whose existing intruder alarm system had become unreliable. The property was previously protected by an older Visonic PowerMaster alarm system, however the external siren had failed and the system was still relying on an outdated PSTN telephone line for communication, which was […]
Paxton Net2 Key Fob Access Control Installation – Care Home in Muscliff
EAC Fire and Security were recently asked to install a key fob access control system at a care home in Muscliff to improve security while allowing residents and staff to move safely through the building. The client required a reliable access solution that would allow authorised users to enter and exit the building without relying […]
Annual Emergency Lighting Test and Six-Monthly Fire Alarm Service – Southbourne Flats Conversion
At a converted house into flats in Southbourne, we were instructed to carry out both an annual emergency lighting discharge test and a six-monthly fire alarm service under the building’s current maintenance agreement. Emergency Lighting Discharge Test A total of emergency lighting units throughout the common areas were tested for the required full three-hour discharge […]
Safety System Maintenance Takeover and Rectification – Boscombe
EAC Fire & Security was engaged by the managing agent of a block of apartments in Boscombe to take over ongoing maintenance of the building’s emergency lighting, fire alarm system and smoke vent / AOV (Automatic Opening Vent) system. Following the initial service visit, several non-compliance issues and faults were identified that required remedial works […]
Quick Intercom Repair – Mudeford
Entrance Panel Noise Fault • Cable Repair • New Speech Module Fitted We were recently contacted by a customer in Mudeford after they experienced a loud screeching noise coming from their entrance intercom panel. In frustration, the customer had cut the panel-to-speech-module cables to try to stop the noise, which left the system inoperable. The […]
Intercom Upgrade – Christchurch Block of Flats
Faulty Speech Module Call-Out • Recommended System Upgrade • New Fermax Skyline Installed We recently attended a service call at a residential block of flats in Christchurch where the existing intercom speech module was reported as faulty. On inspection it was clear that the unit was aged and no longer reliable, and due to the […]
Smoke Vent Actuator Upgrade – Lower Parkstone
Maintenance Visit • Actuator Replacement • Compliance Improvement Following a routine service visit at a residential site in Lower Parkstone, our engineers identified an issue with the building’s smoke vent system that required corrective action. During inspection and testing, it was noted that the existing vent actuator — a 200 mm stroke unit — was […]