Fire Exit Signage Installation at Apartment Block in Parkstone
EAC Fire and Security recently completed the installation of fire exit signage throughout a block of apartments in Parkstone, ensuring the building’s escape routes are clearly marked and compliant with current fire safety standards. Fire Exit Signage Installed in Communal Areas During this project, new fire exit signs were installed across the communal areas of […]
Burglar Alarm Upgrade in Branksome Woods – Pyronix Enforcer Installation
EAC Fire and Security were recently contacted by a homeowner in Branksome Woods whose existing intruder alarm system had become unreliable. The property was previously protected by an older Visonic PowerMaster alarm system, however the external siren had failed and the system was still relying on an outdated PSTN telephone line for communication, which was […]
Smoke Vent Actuator Upgrade – Lower Parkstone
Maintenance Visit • Actuator Replacement • Compliance Improvement Following a routine service visit at a residential site in Lower Parkstone, our engineers identified an issue with the building’s smoke vent system that required corrective action. During inspection and testing, it was noted that the existing vent actuator — a 200 mm stroke unit — was […]
Fire Alarm Installation at Krashtechnic – Nuffield Industrial Estate, Poole
Grade A Category L2 System Installed — C-TEC Panel, Heat & Smoke Detection, Manual Call Points This fire alarm installation provides a high-standard Grade A, Category L2 fire detection system — offering life-safety protection in key areas throughout the commercial workshop and office spaces. What Was Installed For this project we supplied, installed and commissioned: […]
Fire Alarm Upgrade – Block of Flats, Poole
Category L4 Detection & Emergency Lighting Upgrade Following a fire risk assessment at a residential block of flats in Poole, our client asked us to upgrade the communal fire‑detection system. The previous installation was dated (battery‑only detectors) and lacked mains-powered interlinked coverage. To improve safety and bring the system in line with current guidelines, we installed […]
Intruder Alarm Upgrade at Broadstone Bungalow
New equipment throughout using existing cabling — full system refresh At a bungalow in Broadstone, we completed a full intruder alarm upgrade. The client required a modern, reliable system using existing wiring, so we replaced the major components and improved overall protection. Scope of Works Why This Type of Upgrade Matters A security system isn’t […]
Video Intercom System Upgrade – West Moors Flats
12 Handsets Installed – Trade Access Button – Internal Doorbells Linked to Intercom EAC Fire & Security were recently instructed to upgrade the video intercom system at a residential block of flats in West Moors, Dorset. Why the Upgrade Was Needed The existing intercom system had become outdated and unreliable, with worn handsets and poor […]
Intruder Alarm Service in Upton
Backup Battery Replaced – External Bell Fitted – System Settings Corrected EAC Fire & Security recently completed an intruder alarm service at a residential property in Upton, Dorset, after the homeowner experienced a system fault following a power cut. Why the Service Was Needed After a local power outage, the customer noticed their external alarm […]
Intruder Alarm Service in Corfe Mullen
New Door Contact Fitted – External Sounder Replaced – Full System Health Check Completed EAC Fire & Security recently attended a residential property in Corfe Mullen to carry out a full intruder alarm service after a customer reported issues following a door replacement. Why the Service Was Needed The client had recently replaced the back […]
Fire Alarm Commissioning at HMO in Poole
System Commissioned After 1st & 2nd Fix by Local Electrician EAC Fire & Security were called in by a local electrical contractor to commission a newly installed fire alarm system at a licensed HMO property in Kingston Road, Poole. The system had been 1st and 2nd fixed by the electrician, and our job was to […]