EAC Fire & Security recently completed an intruder alarm upgrade at a property in Broadstone, Poole, after the power supply unit in the existing Risco Eurosec control panel failed.
We removed the old panel and installed an Orisec CP-20 control panel with an RK-920 keypad. We also replaced the external bell box before testing and commissioning the alarm.
Replacing the Failed Risco Eurosec Panel
The power supply failure had taken the existing alarm out of service. We replaced the Risco Eurosec panel with the Orisec CP-20 to bring the alarm back into operation.
The original Eurosec keypad was also replaced with an Orisec RK-920. The new keypad gives the customer a clear display for checking the alarm status and a straightforward way to set and unset the system.
New External Bell Box and System Testing
We fitted a new external bell box to provide an audible warning if the alarm activates. Once the installation was complete, we tested and commissioned the system and confirmed it was in good working order.
Before and After the Alarm Upgrade
The job photos show the original Risco Eurosec panel and keypad, followed by the fitted Orisec control panel, the new keypad with its display lit and the replacement external bell box.
Intruder Alarm Repairs and Upgrades in Broadstone
If your alarm has lost power, is showing a fault or is becoming difficult to use, we can inspect the existing equipment and advise on the repair or upgrade it needs. We provide intruder alarm installation and upgrades and ongoing maintenance and repairs.
Need help with an existing alarm in Broadstone?
Contact EAC Fire & Security to arrange a visit or discuss your alarm upgrade.
