We were recently contacted by a property manager in Milford on Sea following a fire risk assessment that highlighted the need to upgrade the communal fire alarm system at a block of flats.
The previous setup consisted of Grade D Aico alarms, which were not suitable for the requirements of a multi-residence building with shared communal areas. These devices had already been removed prior to our arrival.
What We Installed
We supplied and installed a new Grade A L3 Category fire alarm system, which is designed to provide advanced detection and warning throughout the property. This included:
- A full fire alarm control panel with zoning capability
- Manual call points and sounders throughout the communal area
- New cabling throughout the block, surface-mounted in containment for a neat finish
- Heat and smoke detection extended into individual flats as required
This system is compliant with current British Standards (BS 5839-1) for buildings with multiple residential units, ensuring both the safety of the occupants and full legal compliance.
Why Grade A L3?
Grade A systems are required where there is a greater duty of care and the likelihood of fire spread is higher, such as:
- Purpose-built blocks of flats
- Houses converted into multiple flats
- Buildings with communal areas
L3 means the system provides detection in all escape routes and rooms that open onto escape routes, offering an early warning to prevent delay in evacuation.
Fully Compliant and Professionally Installed
All work was carried out to a high standard, with proper labelling, test certification, and user training provided to building management. The system is now:
- Monitored 24/7 by an Alarm Receiving Centre
- Fully tested and commissioned
- Maintained going forward by EAC Fire & Security
Get in Touch
Need a fire alarm installed or upgraded at your property? We cover Bournemouth, Poole, Christchurch, and the surrounding Dorset and Hampshire areas.
📞 07527 265914
🌐 www.eacfireandsecurity.co.uk
