A two-storey house with a ladder leaning against the front wall, a tool bag on the drive for an alarm recommissioning, and a parked car to the left.

Intruder Alarm Takeover & Recommission — Christchurch

Panel Reactivated • Codes Reset • Battery & Bell Replacement • Full Walk Test & Part‑Set Configured

EAC Fire & Security was recently engaged to take over, recommission, and fully service an intruder alarm system at a residential property in Christchurch. The existing system had been deactivated and the owner wanted it brought back into full operational condition.

Scope of Work & Actions Taken

When we arrived, the following issues were noted:

  • The alarm had been turned off / disabled
  • The backup battery was extremely old (about 22 years)
  • The external bell (siren) was faulty
  • Access codes and user configuration were outdated
  • No recent system testing or walk test had been done

Our team carried out the following steps:

  1. Power & Panel Reactivation
    Enabled the control panel, cleared old fault states, and brought the system back online.
  2. Code Reset & Access Configuration
    Reset master, user, and installer codes to ensure full system access and security.
  3. Battery Replacement
    Removed the aged battery and replaced with a new, correctly rated sealed battery to ensure system reliability in mains-loss conditions.
  4. Bell / Siren Replacement
    Fitted a new external bell/siren, properly connected and tested for sound output.
  5. Complete Walk Test
    Triggered all sensors and detectors zone by zone to confirm correct detection, triggering, and reset behavior.
  6. Part‑Set / Partial Mode Programming
    Configured a part‑set mode (e.g. “night mode”) so that the system can be partially armed while permitting movement in certain areas.
  7. System Health Verification
    Checked tamper, sabotage, wiring integrity, and verified overall system status was healthy (no faults or alarms).

Outcome & Benefits

  • The intruder system is now fully functioning and secure
  • Correct power and battery backup restored system reliability
  • The external bell/callout system is working as designed
  • Owners now have new secure access codes
  • Part‑set functionality gives flexible use (e.g. night mode)
  • Peace of mind restored that the system is ready for everyday use