EAC Fire & Security recently supplied and installed an Ajax EN54 wireless fire alarm system at a block of flats in Swanage, Dorset.
The property required a modern fire alarm system designed to improve detection and warning throughout the building, with protection across the escape routes and within the individual flat areas.
Our engineers installed a Grade A Category LD2 fire alarm system, using Ajax EN54 wireless fire alarm equipment. Smoke detection and manual call points were fitted throughout the escape routes, with heat sounders installed within each hall and bedroom.
The Project
The building was a block of flats in Swanage where a reliable fire alarm system was required to provide appropriate protection for residents and shared areas.
For this type of property, it is important that the fire alarm system provides clear warning, supports safe evacuation and gives coverage to the areas identified as part of the fire alarm design.
Our work included:
- Supply and installation of an Ajax EN54 wireless fire alarm system
- Grade A Category LD2 fire alarm protection
- Smoke detection fitted throughout the escape routes
- Manual call points installed in key escape route locations
- Heat sounders installed within each hall and bedroom
- Wireless equipment used to reduce disruption and visible cabling
- Fire alarm control equipment installed
- Fire action signage fitted
- Fire alarm zone diagram provided
- Fire documents box installed
- Full system testing and handover
Ajax EN54 Wireless Fire Alarm System
For this project, we installed an Ajax EN54 wireless fire alarm system.
Ajax EN54 equipment is designed to provide professional fire detection and alarm functionality without the need for the same level of cabling as a traditional hardwired fire alarm system. This makes it a practical option for existing buildings, blocks of flats and properties where running new cables throughout the building would be disruptive.
The wireless system allowed us to install detection and alarm devices in the required areas while keeping the installation neat and suitable for the building layout.
Grade A Category LD2 Fire Alarm Installation
The system was installed as a Grade A Category LD2 fire alarm system.
This means the fire alarm design focused on providing suitable detection and warning in the key areas required for this building, including escape routes and higher-risk areas identified as part of the specification.
For blocks of flats and shared residential buildings, the correct fire alarm category is important because it helps ensure occupants receive early warning and can safely leave the building in the event of a fire.
Smoke Detection in Escape Routes
Smoke detectors were installed throughout the escape routes.
These areas are critical because they are the routes residents use to leave the building during an emergency. By fitting smoke detection in the escape routes, the system can provide early warning if smoke is detected in the communal or circulation areas.
This helps support safer evacuation and improves the overall fire safety provision within the building.
Manual Call Points Installed
Manual call points were installed within the escape routes.
Manual call points allow occupants to raise the alarm manually if they discover a fire or signs of fire. These were positioned in accessible locations so the alarm can be activated quickly in an emergency.
Fire action signage was also fitted next to the call points to provide clear instructions for residents and visitors.
Heat Sounders Installed in Halls and Bedrooms
Heat sounders were installed within each hall and bedroom.
This provides local detection and audible warning within the flat areas, helping ensure occupants are alerted if the system activates.
Heat detection is commonly used in areas where smoke detection may not be the most suitable option, helping reduce unwanted alarms while still providing appropriate fire detection.
Fire Alarm Control Equipment and Documentation
As part of the installation, our engineers fitted the fire alarm control equipment and supporting fire safety documentation.
This included:
- Fire alarm control panel
- Fire alarm mains isolation switch
- Fire alarm zone diagram
- Fire documents box
- Fire action signage
These elements help make the system easier to manage, test and maintain, while also providing clear information for residents, responsible persons and fire safety contractors.
The Result
The block of flats in Swanage now has a modern Ajax EN54 wireless fire alarm system installed throughout the required areas.
The completed system provides:
- Grade A Category LD2 fire alarm protection
- Smoke detection throughout escape routes
- Manual call points in key locations
- Heat sounders within halls and bedrooms
- Wireless installation with reduced disruption
- Clear fire action signage
- Fire alarm zone diagram and documents box
- A professional system suitable for ongoing testing and maintenance
This gives the property a much-improved fire alarm setup, helping support resident safety and compliance with the fire alarm requirements identified for the building.
Fire Alarm Installers in Swanage
EAC Fire & Security installs, upgrades, services and maintains fire alarm systems across Swanage, Wareham, Poole, Bournemouth, Christchurch, Wimborne, Dorset and the surrounding areas.
We work with landlords, property managers, homeowners and businesses to provide fire alarm systems tailored to each building.
Whether you need a new wireless fire alarm system, a Grade A fire alarm, smoke detection, manual call points, heat detectors, sounders, fire alarm servicing or fire alarm maintenance, our team can help.
Contact EAC Fire & Security today to discuss your fire alarm requirements.
