Hybrid Orisec Intruder Alarm Upgrade in Oakdale, Poole
EAC Fire & Security upgraded an existing intruder alarm at a home in Oakdale, Poole. We removed the old Honeywell control panel and fitted a hybrid Orisec alarm system, combining the property’s existing wired motion sensors with new wireless detection. The upgrade also included a new vertical keypad, contacts on three doors and a replacement […]
Intruder Alarm Upgrade in Broadstone
EAC Fire & Security recently completed an intruder alarm upgrade at a property in Broadstone, Poole, after the power supply unit in the existing Risco Eurosec control panel failed. We removed the old panel and installed an Orisec CP-20 control panel with an RK-920 keypad. We also replaced the external bell box before testing and […]
Intruder Alarm Upgrade & Orisec CK-20 Installation in Wimborne
EAC Fire & Security recently completed an intruder alarm upgrade in Wimborne, Dorset, replacing an ageing alarm control panel and repairing several faults affecting the property’s existing security system. During our inspection, we discovered multiple problems, including faulty motion detectors, bypassed tamper circuits and a faulty panic alarm (PA) button. To restore reliable operation, our […]
Visonic Alarm Replaced with New Wireless Orisec System in Broadstone
EAC Fire & Security recently completed a wireless intruder alarm installation in Broadstone, Poole, replacing a non-functioning Visonic alarm system with a modern Orisec security system. The residential property was previously maintained by R U Secure, and the existing Visonic intruder alarm was no longer operational. Rather than continue relying on a faulty system, the […]
Texecom Intruder Alarm Takeover & Servicing in New Milton
EAC Fire & Security recently completed an intruder alarm takeover and routine service at a residential property in New Milton, Hampshire. The property already had a wireless Texecom Premier Elite 48-W intruder alarm system installed. Our engineers attended to take over the maintenance of the existing system, replace the wireless device batteries and carry out […]
Intruder Alarm Repairs & CCTV Installation in Hamworthy, Poole
EAC Fire & Security recently completed an intruder alarm repair and CCTV installation at a residential property in Hamworthy, Poole. The homeowner had an existing Texecom Premier intruder alarm system that was experiencing faults and also wanted additional security cameras installed to monitor the front and rear of the property. Our engineers diagnosed and repaired […]
Wireless Intruder Alarm & CCTV Installation in Branksome, Poole
EAC Fire & Security recently completed a wireless intruder alarm and CCTV installation at a residential property in Branksome, Poole. The customer wanted a modern home security system that would provide reliable protection, straightforward operation and remote access through their mobile phone. Our engineers installed a new Orisec wireless intruder alarm system, complete with motion […]
Intruder Alarm Takeover and Repairs in Barton on Sea – Scantronic 9452
EAC Fire & Security recently completed an intruder alarm takeover and repair in Barton on Sea, New Milton, restoring an existing Scantronic 9452 burglar alarm system to full working order. During our initial inspection, we discovered several alarm circuits had been linked out, including the detection tamper circuits, external bell tamper and zone 1. Our […]
Texecom Veritas Intruder Alarm Takeover and Repair in Poole
EAC Fire & Security recently carried out an intruder alarm takeover and repair at a property in Poole. On arrival, the existing Texecom Veritas alarm panel was turned off. The customer needed the system inspected, fault found and brought back into working order so the alarm could be used properly again. Our team powered the […]
Orisec Alarm App Repair and Remote Access Upgrade in Blandford Forum
EAC Fire & Security recently attended another former R U Secure site in Blandford Forum after the customer lost access to the mobile app for their intruder alarm system. The issue started after the customer’s router had been changed. Since then, the mobile app had stopped working, meaning the customer could no longer remotely access […]